X100 Model Features 48 I/O Lines. 82C55 PPIs. 8 Multiplexed Addresses.

The board's I/O lines are outlined at the header connectors and at the DB-25 header connector.

8 Multiplexed jumper selectable base addresses, starting at: 200H.

PC, XT, AT ISA bus compatible.

TTL/CMOS compatible interface I/O lines.

The board's I/Os are divided into 6 PROGRAMMABLE 8-Bit ports, plus 2 configuration ports.

A compiler and experience using it, such as Basic or C is required.


A very Important Tip:
For its I/O lines, the X100 has three .1" spaced 8-pin male connectors and one female DB-25 connector. We strongly advice to acquire three .1" spaced female connectors and a DB-25 female mating connector. These connectors are built with solderable pins, thus making it easy for the user to connect things to the X100's I/O lines.
These connectors can be found at our parts department, the part numbers are: FHC and XDB-25.