MC200 Model Features 68HC11E1 Microcontroller. 36 Bit IN/OUT plus an 8 Channel, 8 Bit A/D Port. RS-232 Serial Port. 46 total of I/Olines. 512 bytes of internal EEPROM. 16K EPROM. 32K SRAM. Size: 3.0" x 3.0" (7.62cm x 7.62cm). 8Mhz operation speed. SBasic Compiler included. Capable of writting/running to/from EEPROMs

Assembler, SBasic compiler and uploading software included. All Software Features are managed from within a single Software Program.

With the software included, aplications can be easily developed in 3 steps:

1) Edit a program in Assembly or SBasic
2) Assemble or compile the just edited program
3) Send the program's HEX file through the serial port on to the board's SRAM or EEPROM.

After the last byte is received, the board's monitor automaticaly gives control to the just received program.

EEPROM Programing Features:
* Upload and Save a program into EEPROM.
* Upload, Save and Run a program into EEPROM.
* Run a previously Saved program from EEPROM.

As described above, the board comes with a 32K SRAM for program upload. Instead of the 32K SRAM, the user has the option of using 8K or 32K EEPROMs or NVRAMs, either can be programed by the board.

The on board 16K EPROM monitor can be replaced with a programed EEPROM or NVRAM for standalone implementation. This gives the user the capability of using up to 64K of memory.

The board is designed to easily allow installation of a 5V Regulator IC. (not included).

Board's Power Consumption: 65mA.

5V Power Supply and Serial Connector Required
At our Parts Department, you can order an optional EEPROM.